Wusikstation

1)64bit version
2)support mono/stereo single cycle waveforms, which are automatically looped and tuned if a .WAV file does not contain loop points.
The maximum length allowed for a single cycle waveform is < 0.0625 of the waveform's sample rate.
3)View documentation via System Menu
4)Switch between CPU: C++/Vector via System Menu

Bugs Fixed:

* Fixed: Midi-Echo. Now you can chain several WS instances (eXT, Reaper, etc) and midi is passed to all instances.
* Fixed: fixed problem on loading older projects files.
* Fixed: memory leak problem upon loading, closing and re-loading.
* Fixed: wrong GUI size in some hosts.
* Fixed: TreeView keeps the last path and loaded item when you close/open the Editor/GUI and also when you reload a project.
* Fixed: sample-rate problem on synth startup. This would make the pitch-bend not function, and also produce odd-behaviour of the whole synth fine-tune. (specially with hosts like SONAR)

What's new for V6.0.0
* Added: New Multi Preset Layer. Now you can have 16 times more Layers, WaveSequencers and GrooveSequencers. Each Multi Preset Layer can load a full WusikPRST file.
* Added: New TreeView File Browser which lets you browse not just the Wusik Station Data Folder, but your entire Drive(s) on your computer. With several options, like Drag-and-Drop to move files around, copy, paste, rename, move, new-folder, search and other options.
* Added: Drawable Waveforms. We included a small set of waveforms in a WusikPACK file. You can also open regular sounds and convert to a Drawable WusikSND file. They work just like a regular WusikSND file, but when you open the Sample-Editor, it shows a different window where you can draw waveforms directly. There are several ways to draw and manipulate waveforms: free-draw, line-draw, zoom, phase-positioning, smooth, normalize, phase-invert and inverse. Drawable waveforms are saved in the preset/project file, so there's no need to save to WusikSND files, unless you want to share your waveforms.
* Added: Groove Sequencer Remote Pattern key zone start and end. The key just before the lowest zone key will stop the current groove.
* Added: new Mod-Matrix Destination - Sticky Keys. When you play a key, it will sustain until you play another key, and the a certain time has passed. Or, if you play a near zero velocity key (velocity < 20, from 127) all keys will stop. The time is set with the Amnt option. It will use the BPM tempo to determinate the number of secods of each beat. So, if you set 1, it will stick all keys played during the period of 1 beat. This is better than latch, as you can play chords, and not even at the same time. Just raise Amnt to the number of beats you want notes to stick together.
* Added: option to disable audio-input. (right click / context menu)

Bugs Fixed (V6)
* Fixed: mod-matrix problem with Midi-CCs as Source and Amplitude as destination. (and other destinations) This would cause a high-pitch sound in the Orchestral-Lite Wind sounds.

List of New Sounds / New Additions to Wusik Station V6 Full Version:
The Sound Bank, Volumes 1, 2 and 3. Those are not new sounds, but previously released sounds, that are now part of the Wusik Station V6 New Sound Package. (plus the previous V5 Sounds Package)

* Important: this new version will ask you a new Serial-Number, which starts with { and ends with }, be sure to copy the whole number. When you start Wusik Station for the first time, open the GUI/Editor and click on the box that shows up, you will be prompted to enter the new SN now. This number is found when you visit your Wusik Station V5 Download URL. If there's no SN, please, create a new support ticket and request it to be added to your account, be sure to include your Wusik Station V5 Download URL so we can check things out for you. A note, if your Download URL shows up a Serial-Number without { and } at the start and end, this is an Old SN, you need to request a New one.
* Added: new Mod-Matrix Sources: Alternate First, Mono and Poly. The value alternates from Min to Max in a Ping-Pong way.
* Added: click once in any Pitch-Bend parameter, a new Global Off option can be found. This will turn all layers Bend to off and also any patch you load after that. This is saved in the wINI file, so any new instance loaded after that is also affected.
* Changed: how the Groove Sequencer page selector works with the new skin type 3. (White-Skin) Now it will just scroll the sequences, instead of changing the pages.
* Changed: now you can use the Stereo Pan Polyphonic Destination in the Mod-Matrix, even for Mono Sounds. It will force it to Stereo-Mode.
* Changed: tweaking the Wavesequencer slot, goes back to page 1, instead of page 2.
* Changed: In the Groove Sequencer, the Current Step Beat and Current Step Edit images are now draw on Top of the Step image.
* Changed: in the FX version, the FX Name was not centered like the FX Preset.
* Changed: Groove Sequencer Remote-Edit Ctrl+Up/Down now changes the Sequence-Lane Page/Offset.
* Fixed: when using multiple filters for the same layer, changing frequency would tweak resonance too.
* Fixed: white-skin file search color problem and other skin typos. Also fixed a problem during install that would merge the old Default skin file with the new one.
* Fixed: groove sequencer remote pattern wrong tool-tip information.
* Fixed: Wavesequencer Sample Start Lane wouldn't work with Speed=Off for any other step when modulating the sequence start with the modulation matrix.
* Fixed: when Groove Sequencer is playing, changing SEQ page doesn't update seq lanes.
* Fixed: Groove Sequencer Remote-Edit Ctrl+Up/Down wouldn't work correctly.
* Fixed: Groove Sequencer - duplicating a pattern with Midi CC information. (some other random problems related to Midi CC lanes)
* Fixed: automated-load crash problem when starting from layer O1 in some situations.
* Fixed: problems with Insert effects not loading presets or/and redrawing the screen.
* Fixed: clicks when streaming from disk in certain situations.

* Added: new White-Skin by Cusis with a different layout.
* Fixed: Unison code. (using the previous old code, but without the detune problems)
* Fixed: Pitch-Bend was out of tune. Now is dead-on.
* Fixed: crash when using the internal keyboard to play notes very fast.
* Fixed: clicking sounds when playing stereo WAV files. (another problem found)
* Fixed: loop problems with mono WAV files.
* Fixed: SFZ file, path location in non windows format. (using '\' instead of '/')
* Fixed: integrated sampler editor loop markers were no longer working. (due to a new Slicer mode that is under implementation)
* Fixed: some parameters where changing the selected layer when it shouldn't be happening. (Arp/Voices)
* Fixed: all popup message boxes / questions are now modal. (always on top)
* Fixed: WusikPACK code. Added SFZ WAV Packing support. (before it would pack the SFZ file but not the WAV files) Also improved Packing/UnPacking Percentage Bars.
* Fixed: loading very large SFZ files.
* Fixed: when entering the G.Seq (G) page, it would blink the Patterns wrongly. Also when Playing by clicking in the layer selector again.
* Fixed: the FX version would crash in certain hosts.
* Updated: skin type 3 for the new white-skin. Now it shows Unison, FX-Edit-2 and FX-Edit2 only in the Layers editor. (O1, O2, O3, O4, W1, W2) A new FX-Edit1b and FX-Edit2b was introduced to be shown in the Master and FX-Editor. The Groove Sequencer will display 5 lanes, instead of 8 lanes.

* New Feature: Preview-Preset. In a previous update we forgot to mention this new feature. (it was there already, but we forgot to add to the list) When turning this ON, when you load the preset the first time, it loads only a portion of the key-zones. Clicking to load it again will force to load the entire set. This is only useful with large sets like PRIZM and the Maestro-Piano. (File-Browser -> Other Options -> Preview Preset)
* Added: clicking once in the Tune knob will open an Octave selector.
* Added: Transpose - Groove Sequencer (G.Seq) right click on any presets lane. This will affect all mellodic lanes. (note mode)
* Added: animated keyboard, Left Click + Control Key = Hold Note. Right Click = Velocity by Y Position.
* Added: master vibrato Sine/Triangle waveform and speed parameters. the tools option for the mod-matrix was also updated.
* Changed: new interpolated AMP envelope code. Improved sound for using quick Attack, Decay and Release.
* Changed: G.Seq (Groove Box Sequencer) External Sync, Global Tempo, Sequencer PAge and Current Steps Page (E.Sync, G.BPM, Sequences and Steps-Page) are now saved per Project, not preset.
* Changed: Micro-Tunning (TUN Files) is now saved per project, no longer per preset.
* Changed: fine-tune any parameter by holding the shift key. (or the middle mouse button with no shift)
* Changed: added menu options for Pitch-Bend, Midi-Channel (master and layer) and Master-Transpose parameters.
* Changed: removed the auto-sort when adding something to the modulation-matrix. Added new options to organize: add below, add above, delete. If you want two modulations to go to the same destination, you must add those one after the other. So you can select the extra options: multiply, merge, ...
* Changed: the animated-keyboard key-zones now follows the Master Octave/Transpose and the Layer Transpose. (Tune)
* Changed: better Unison code. (before it was out of tune)
* Changed: clicking in the LFO waveform switches to the selected waveform. (before you had to click, hold and drag)
* Changed: selecting LFO to Amplitude makes the LFO range go from -1 to +1, instead of 0 to +1. Setting Min to 70 makes it default to 0 to +1 when required. this doesn't affect older presets, as they default to 0 to +1.
* Fixed: when loading a soundset, it tries to load several types before searching for a file. (WusikSND, DASHsnd, SFZ and WAV)
* Fixed: when exporting a SFZ file, the path location of the WAV files are now saved in the SAMPLE= opcode. Before it was using the following unsuported opcode " Default_Path".
* Fixed: problem on changing the "Tune" Knob while playing a note.
* Fixed: problem with older skins crashing the engine. (skins without the keyboard-display)
* Fixed: problem with the Groove Box Sequencer (G.Seq) and External Sync. (E.Sync)
* Fixed: missing WaveSequencerEditor tool-tips, and wrong/missing tool-tips on some parameters since a previous V5 update. (file-browser, xy pad, ...)
* Fixed: couldn't set a mod-matrix destination FX to other lanes than the first one.
* Fixed: clicks when playing back stereo WAV files. Also editing of stereo WAV files in the integrated sample-editor.
* Fixed: crash when selecting "FX Preset" from the file-browser while having no Effect loaded in the FX1 slot.
* Fixed: problem with loading SFZ files. When pitch_keycenter is not set for a , it should default to key 60. (before it wasn't)
* Fixed: loading multi-velocity sounds wouldn't show the zones correctly in the animated-keyboard. Now it shows the first velocity-zone it finds.
* Fixed: the internal sample-editor no longer follow the layer-pitch. (Tune/Fine/Modulations)
* Fixed: lfo depth problems when using pitch/fine/amplitude destination.

* New animated keyboard display at the bottom of the GUI. It also shows the current key-zones for the selected layer, and any possible key-switches with a different color. You can click on keys to audition presets. There's a master Hide/Show option in the Global Contextual Menu.
* New Modulation-Matrix Destinations: All Envelopes Attack, Decay, Sustain and Release levels. (All Amp and Mod Envelopes)
* New Modulation-Matrix option: Real-Time. (ON by Default) When you have a Mod-Matrix slot that doesn't need to be processed in Real-Time, you can turn this option to Off and save a lot of CPU usage. The processing will only be done when a new note is played.
* Several new options to the WusikSND format as described by the list below. (plus support for the same options on SFZ files)
* Added all the above new WusikSND options to the new Integrated Sampler-Editor.
* Disk-Streaming support for SFZ/WAV files. (16 and 24 bits - Layers O1, O2, O3 and O4)
* More SFZ op-codes: PITCH_KEYTRACK=0, PITCH_KEYTRACK=100, LOOP_MODE=ONE_SHOT, LOOP_START, LOOP_END, OSCILLATOR=ON, TRIGGER=FIRST, TRIGGER=LEGATO, TRIGGER=RELEASE, OFFSET, SEQ_POSITION, (aka Round Robin, starts at 1) SW_LAST, SW_DOWN, SW_UP, SW_PREVIOUS, (Key Switches, -1=Default and -2=SustainPedal) LORAND and HIRAND. (random sample selection on new note)
* SFZ Export added to the sample-editor. (thanks to Asseca)
* New Choke-Group: Stop All. When playing a sound with this group setting, all other notes will stop. In the SFZ support, this is group 999.
* SFZ files: Mono and Stereo samples can be mixed together in the SFZ file now.
* Changed: library compiler file checkings. It no longer checks if the library file link is active, making the library compile process much faster. If you moved files around, you need to use the 'Fix' tool instead. (file-browser->options->other options)
* Drag-and-drop of WusikPRST (Preset) files. (before it was WAV, WusikSND and SFZ files only)
* New Skin-Type 003. All Mod-Matrix parameters are hidden in the following layers: Master Mix, Master FX Edit and Wavesequencer Editor.
* When trying to load a WusikSND file that is missing, first, the code will try to open the same file-name with the .SFZ extention. If a SFZ file is found at the same location as the original WusikSND file, it gets loaded and the preset re-saved with the SFZ reference instead.