SignalScope Pro v 3.8
3 mars 2015
MacOS X Intel
Versions 3.8 of SignalScope, SignalScope Pro, and Electroacoustics Toolbox for Mac OS now offer built-in support for USB measurement microphones from miniDSP and Dayton Audio as well as the model 333D01 USB accelerometer from Digiducer.
Each app directly supports the miniDSP UMIK-1 and Dayton UMM-6 USB measurement microphones. Sensitivity calibration data for these mics can be downloaded automatically, just by entering the mic’s serial number. Making calibrated sound level measurements is as easy as plugging in the UMIK-1 or UMM-6, typing in its serial number, and getting started with the analysis tool of your choice (the serial number only needs to be entered once, after which the app will remember the microphone sensitivity). An internet connection is required to download sensitivity information for the microphone.
Each of these apps also directly supports the Digiducer 333D01 USB digital accelerometer, and can automatically load serial number and sensitivity calibration information directly from the device. Making calibrated acceleration measurements is as easy as plugging in the 333D01 and getting started with the analysis tool of your choice.
Various bugs and potential instabilities in each app have been corrected.
These apps all require Mac OS version 10.7 or later.
SignalScope Pro v 3.7
4 déc. 2014
MacOS X Intel
All Faber apps for Mac OS received updates to improve their compatibility with Yosemite (Mac OS 10.10). Electroacoustics Toolbox 3.7, SignalScope Pro 3.7, SignalScope 3.7 and SignalSuite 4.7 are all 64-bit applications that have been built for Yosemite.
The Room Analyzer tool, available for in-app purchase in Electroacoustics Toolbox, now calculates room parameters in whole or 1/3-octave frequency bands from impulse response data that has been sampled at higher sample rates (88.2, 96, 176.4, and 192 kHz), in addition to sample rates of 44.1 and 48 kHz that were supported previously.
The Octave Analyzer tool, found in both Electroacoustics Toolbox and SignalScope Pro, also now supports the higher sample rates for real-time spectral analysis of input signals in whole or 1/3-octave frequency bands.
The Dual FFT Analyzer (only in Electroacoustics Toolbox) and FFT Analyzer tools now support additional dB vertical scale factors of 3, 6, 9, 12, 15, or 18 dB per division in the graphic display.
Various bugs and potential instabilities in each app have been corrected.
SignalScope Pro v 3.1.6
28 janv. 2014
MacOS X Intel
All Faber apps for Mac have been updated to make more efficient use of resources. Two issues have been corrected which could potentially lead to excessive memory use.
SignalScope Pro v 3.1.5
27 nov. 2013
MacOS X Intel
This update addresses plot freezing issues on Mac OS 10.9 (Mavericks).
SLM and Octave Analyzer tools operate more efficiently.
A potential crash has been addressed in the Signal Generator tool.
SignalScope Pro v 3.1.1
28 févr. 2013
MacOS X Intel
€¢ Help files now open in the default web browser.
• Help is now available from within the app as a PDF file.
• Spectrogram behavior upon loading from a project file has been improved.
• The stability of all FFT-based tools has been improved.
• Other minor and cosmetic issues have been addressed.Version 3.0.5 corrects an issue that halted live updates of bar meters and fixes a bug that could potentially cause the app to crash.
SignalScope Pro v 3.0.5
2 févr. 2012
MacOS X Intel
Version 3.0.5 corrects an issue that halted live updates of bar meters and fixes a bug that could potentially cause the app to crash.
SignalScope Pro v 3.0.4
30 nov. 2011
MacOS X Intel
Version 3.0.4 is a maintenance release.
SignalScope Pro v 3.0
11 mars 2011
MacOS X Intel
* Version 3 sports an improved user interface.
* Up to two tools of each type may be added to a project.
* User preferences are available for individual tools.
* Default audio device configurations, including channel labels, units, and sensitivity can be saved.
* Virtual input channels can be added to audio input devices. Two-channel signal arithmetic (add, subtract, multiply) is now supported.
* Arbitrary FFT lengths may be specified in FFT-based analysis tools.
* The Spectrogram supports log frequency scales and real-time 3D spectrogram display.
* Version 3 includes various other improvements over previous versions.
* SignalScope Pro may now be purchased and maintained through the Mac App Store.
SignalScope Pro v 2.1.10
12 nov. 2010
MacOS X UB
* Channel count changes for multi-channel audio devices are handled dynamically, avoiding potential crashes.
* Several other minor bugs have been corrected.
SignalScope Pro v 2.1.9
28 mai 2010
MacOS X UB
* Output channels of certain multi-channel audio interfaces, such as the MOTU UltraLite mk3, are properly enumerated.
* Audio device channel gains on certain devices, such as the Wavelength Proton USB DAC, are properly restored when opening project files.
SignalScope Pro v 2.1.8
7 mai 2010
MacOS X UB
Version 2.1.8 is a maintenance release that improves the stability of the application.
SignalScope Pro v 2.1.7
8 févr. 2010
MacOS X UB
Version 2.1.7 is a maintenance release that improves the stability of the application.
SignalScope Pro v 2.1.5
2 sept. 2009
MacOS X UB
The new updates include improved Leopard compatibility and stability enhancements. These updates are recommended for all users of SignalScope/Pro 2.x or SignalSuite 3.x.
SignalScope Pro v 2.1
11 févr. 2009
MacOS X UB
* Input channel selection now relies on checkboxes and radio buttons for more intuitive operation.
* Unaffected channel settings are preserved when the input channel selection changes.
* The new Meter Bridge tool behaves like a multi-channel version of the Sound Level Meter.
* Up and Down auto-scaling options have been added to the FFT Analyzer and Oscilloscope tools.
* Changes made to table rows can be applied to all rows in the FFT Analyzer and Oscilloscope control drawers.
* The Signal Generator tool now supports processing the output signals with up to three Audio Units plug-ins.
* The Signal Generator tool now supports streaming its output signals to WAVE or AIFF audio files.
* Verstion 2.1 includes numerous bug fixes and stability enhancements.
SignalScope Pro v 2.0
12 févr. 2008
MacOS X UB
Completely redesigned, all new code
- Compatible with Leopard
- Comprehensive AppleScript support
- Each analyzer now resides in its own independent window.
- Audio device and analyzer configurations and acquired data can be saved in project files.
- Displays are accelerated with OpenGL graphics for on-screen drawing, and use Quartz 2D for high resolution off-screen drawing to PDF files or the printed page.
- Zoom and Pan cursor types are available for most data displays.
- Each analyzer has received numerous enhancements.
- The FFT Analyzer, Oscilloscope, and Meter Bridge tools can analyze multiple (more than 2) channels simultaneously.
- Current data can be captured for later review or export.
- Captured data can be exported to tab-delimited ascii text or MAT-files.
- Some analyzers allow live data to be overlaid on captured data for quick review.
- Independent calibration of device voltages and individual input/output channels is possible.
- Various units, such as Volts, Amps, and Pascals, are supported for input and output channels.
- Devices and input/output channel names are customizable (names are saved in project files).
- New tools: Sound Level Meter, Meter Bridge, and Signal Generator
- SignalScope Pro's new stereo signal generator supports Audio Unit generator plug-ins.
- Analyzers can take signal generator output directly.
- Numerous other improvements and enhancements
SignalScope Pro v 1.8.7
28 nov. 2007
MacOS X UB
Version 1.8.7 includes an updated registration engine (with improved Leopard compatibility)
SignalScope Pro v 1.8.5
4 janv. 2007
MacOS X UB
SignalScope 1.8.5 prevents a potential crash at startup and allows Autoscale to be turned off in demo mode.
SignalScope Pro v 1.8.3
9 mai 2006
MacOS X UB
Version Universal Binary
SignalScope Pro v 1.8.2
27 sept. 2005
MacOS X PPC
When selecting a new audio device or starting up SignalScope, the current nominal sample rate of the device is kept. Previous versions of SignalScope automatically set the sample rate to its maximum value, which sometimes resulted in temporary loss of audio output on some computers, like the iMac G5. See Apple's article for more information (Article ID: 300832).
moins...
Vous devez vous identifier pour poster un commentaire:
Identifiez vous grace à votre compte 440Software (MacMusic, PcMusic, 440TV, 440Forums, 440Software, ...) ou via votre compte FaceBook, Twitter ou Google.