Mid-Side SHG/V+

Mid-Side: stereophonic harmonic generator/vitalizer+ is a stereo enhancer and processor with brand new technology for vitalizing, coloring, controlling, adjusting and widening stereo material (the side part of a signal) as well as adding space, width and depth to the mixes. Mid-Side: SHG/V+ is a useful tool for mixing and mastering.

Mid-Side: SHG/V+ is not just a basic stereo widening tool, it is brand new way of controlling and effecting the stereo space of your mixes, adding ambiance,
depth and color/higher harmonics to the stereo (side) part of your music. Basic stereo widening is a technology of the past. Mid-Side: SHG/V+ allows you to
split/extract sound into Mid and Side parts of the sound and adjust the mono (mid) and stereo (side) parts according to your arbitrary requirements: equalize
stereo (side) parts by two separate modules (freq, q-bandwidth, boost), add higher harmonics/analog color to the equalized stereo (side) signal, delay overall
side (stereo) signal by a very few milliseconds to create theatrical atmospheres, ambiance and space or just delay one equalized/colorized/boosted part of
signal to create a slight reverb effect. You can boost or attenuate the mono (mid) part, attenuate or boost the stereo (side) part by 1 to 3 times more, pass full
frequency spectrum signals through a stereo (side) circuit 20hz to 20khz (by the original side signal mix level knob) or just pass through only two filtered
frequencies of side harmonic generators, 1 and 2.

Attention: Mid-Side: SHG/V+ works ONLY with real STEREO signals (This means 2 channels of slightly different signals, to be real stereo, the signals need to
have a minute difference and not just the same one panned left and right) You can detect if your signal is a real stereo signal by changing the MID scroller to a
zero amount, if you hear the SIDE stereo part of the signal, your audio is real stereo. If your channel is mono only you will not hear any SIDE (stereo) part of
signal, but you can make your signal stereo by adding reverb, ping pong delay or other effects.

We recommend to use Mid-Side: stereophonic harmonic generator/vitalizer+ on individual mixer channels during mixing. Mid-Side: SHG/V+ can be used also
on stereo Bus / master channel during Mixing or Mastering using more gentle settings.